universal ac input / full range no load power consumption <0.3w compact size meet eisa 2007 (energy independence and security act) 2 pole usa plug class power (without earth pin) protections: short circuit / overload / over voltage / over temperature pass lps 100% full load burn-in test fully enclosed plastic case low cost, high reliability 2 years warranty specification order no. safety model no. dc voltage note.2 rated current current range rated power ripple & noise (max.) note.3 output setup, rise, hold up time voltage range frequency range efficiency (typ.) note.7 ac current input environment inrush current (max.) leakage current(max.) safety standards safety & emc (note. 8) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing protection 5v gusb05 GS05U-USB 1.00a 0 ~ 1.00a 5w 90mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 4.0% 4.0% 1.0% 1500ms, 20ms, 15ms at full load 90 ~ 264vac 127 ~ 370vdc 47 ~ 63hz 69% 0.15a / 100vac 35a / 230vac 0.25ma / 240vac ul60950-1, csa22.2 approved withstand voltage isolation resistance i/p-o/p:4242vdc i/p-o/p:100m ohms / 500vdc / 25 / 70% rh 1100khrs min. mil-hdbk-217f(25 ) -20 ~ +50 (refer to output load derating curve) 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 41.86*32.76*23.8mm (l*w*h) 26g ; 300pcs / 10.3kg / carton connector plug usb type a 1.all parameters are specified at 115vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerance: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 0% to 100% rated load 7.efficiency is measured at 115vac. 8.the power supply is considered as an independent unit, but the final equi pment still need to re-confirm that the whole system complies with the emc directives. features : compliance to fcc part 15 class b emi conduction & radiation overload over voltage 105 ~ 135% rated output voltage power protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : hiccup mode, recovers automatically after fault con dition is removed 105 ~ 160% rated output voltage, detect on main control ic 5w ac-dc single output wall-mounted type g s 0 5 u - u s b u1 tj 135 typically (u1) detect on main control ic protection type : shut down o/p voltage, recovers automatically after t emperature goes down over temperature file name:GS05U-USB-spec 2011-03-31
mechanical specification derating curve file name:GS05U-USB-spec 2011-03-31 unit:mm ta ( ) load (%) -20 10 20 30 50 40 60 100 static characteristics input voltage load (%) 0 50 60 70 60 100 264 80 90 100 80 5w ac-dc single output wall-mounted type g s 0 5 u - u s b - + 4 3 2 1 12.7 17 41.86 12.4 5.05 23.8 32.76 22.4 13.05 21.9 12.5 usb type a
|
